Verator

Cleaning intensifier for mixing with Veroclean-plus

For removing coatings which could previously only be removed partly or not at all
Capacity to dissolve the polymer coating quickly
Removal of epoxy resin fog
Suitable for linoleum

Area of application
Can be used on water-resistant, alkali-sensitive and alkali-resistant floorings, such as PVC, linoleum, rubber.

Application
Please test on a small inconspicuous spot before first application.

Preparation of the stripping solution:
Mix equal parts of Veroclean-plus, Verator and cold water.
Polymer stripping:
Distribute the stripping solution on the floor, leave to react for approx. 10 minutes, scrub, vacuum the dirty solution, then rinse thoroughly with clean water.
Removal of epoxy resin fog:
Apply the undiluted product and leave for approx. 30 minutes to react. A longer reaction time is required for heavier soiling or older stains. Remove the accumulated surface soiling with a brush, cleaning pad or scraper, and rinse with clean water. Repeat the process if necessary. Do not allow the product to dry.

Note
Kiehl accepts no liability or responsibility for damage caused as a result of incorrect use or application of the product. Not a consumer product according to 1999/44/EC Art. 1! For professional use only!

Ingredients (according to 648/2004/EC)

Water-soluble solvents, solubilizers. pH value (concentrate): approx. 8.5

pH value (ready-to-use solution): approx. 9

Classification

Classification (in concentrate): GHS07, Warning. H302+H312+H332 Harmful if swallowed, in contact with skin or if inhaled. H319 Causes serious eye irritation. H315 Causes skin irritation. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves/eye protection. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Contains: Benzylalcohol / Butoxyethanol (INCI)