Clarida-eco Sani

Acid-based sanitary cleaner

Removes limescale as well as cosmetics residues and soap scum in the entire wet area
A fresh and intense fragrance during use

Area of application
Can be used on acid and water-resistant surfaces and objects in sanitary areas. Acid-sensitive surfaces, such as damaged chromium coatings on fittings, brass, anodised aluminium, polyamide and acid-sensitive natural and artificial stone, can be damaged by products containing acid.

Application
Please test on a small inconspicuous spot before first application. Always water joints and fittings beforehand with cold water. Rinse all treated surfaces with water.

Routine cleaning (surface cleaning):
Apply the product undiluted or with a dilution ratio of up to 20 ml to 4 L of cold water, depending on the degree of soiling. Wet the surface with the product or cleaning solution and clean with a cleaning textile. For toilet bowls and urinals, spray the undiluted product under the rim, leave it to react for a short time, clean and flush with water. Consumption: 1.0‒5.0 ml/m².

Routine cleaning (wiping):
Up to 40 ml to 8 L of cold water, depending on the degree of soiling. Wet the surface with cleaning solution and clean with a mop. Consumption: 1.0‒3.0 ml/m².

Note
Kiehl accepts no liability or responsibility for damage caused as a result of incorrect use or application of the product. Not a consumer product according to 1999/44/EC Art. 1! For professional use only!

Ingredients (according to 648/2004/EC)
Nonionic surfactants < 5%, inorganic acids, organic acids, maintenance substances, dyes, fragrances (Limonene, Hexyl Cinnamal).
pH value (concentrate): approx. 0.5 pH value (ready-to-use solution): approx. 4

Classification
Classification (in concentrate): GHS07, Warning. H319 Causes serious eye irritation. P280 Wear eye protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.